|Title||Jang Hee Lee, Sang Yong Lee and Choongsik Bae, "Examination of Spray Behavior at the Final Stage of Diesel Injection,"pp673-678, Proc. 4th JSME-KSME Thermal Engineering Conference, Kobe, vol 2. Oct. 2000.|
Jang Hee Lee, Sang Yong Lee and Choongsik Bae, “Examination of Spray Behavior at the Final Stage of Diesel Injection,”pp673-678, Proc. 4th JSME-KSME Thermal Engineering Conference, Kobe, vol 2. Oct. 2000.
Spray behavior at the final stage of a diesel injection from a single-hole injector was examined experimentally. The after-injection and the dripping phenomena were observed at the final stage of injection, which may cause generation of the unburned hydrocarbons or the particulate materials. Needle bouncing within the injector was detected and turned out to be the major reason for the after-injection. Both the amplitude and the frequency of the needle bouncing (after-injection) increased with the higher valve-opening pressure. When the valve-opening pressure was increased, the spray drops became finer and more dispersed compared to the case with the lower valve-opening pressure. However, the spray drops formed during the after-injection period are still coarser than those formed during the primary-injection period. The amount of the fuel discharged during the after-injection period also increased with the higher valve-opening pressure. Accordingly, the overall atomization performance was improved only marginally with the increase of the valve-opening pressure. Spray drops appeared finer and the dripping of the liquid fuel was suppressed when the ambient pressure was increased.
|Previous||Sungwoo Cho, Sangmin Choi and Choongsik Bae, “Measurement Devices for Piston Assembly Friction and Oil Film Thickness,”pp173-178, Proc. 15th International Symposium on Internal Combustion Engines, Paper No. 9935347, Seoul, Jul. 1999.|
|Next||Jaejoon Choi, Seokwhan Lee, Hyondong Shin and Choongsik Bae, “Fuel-Spray Characteristics of High Pressure Gasoline Injection in Flowing Fields,” pp685-690, Proc. 4th JSME-KSME Thermal Engineering Conference, Kobe, vol 2. Oct. 2000.|